The ‘bs=1m’ at the end is for blocksize, which also speeds up the process. Note that an ‘r’ signifier is placed in front of the disk identifier, this makes the command much faster. Sudo dd if=~/Desktop/Windows10_圆4_EN-US.iso of=/dev/rdisk3s2 bs=1m

Sudo dd if=/path/image.iso of=/dev/r(IDENTIFIER) bs=1mįor example, with a Windows ISO named ‘Windows10_圆4_EN-US.iso’ on the desktop, the syntax would be: Assuming you know what you’re doing, replace the iso path with the ISO to burn to the intended target identifier volume using the following command: You’re now ready to format the target drive and ‘burn’ the ISO to that USB volume – this will erase all data on the target drive replacing it with the ISO, this can not be undone – it is absolutely critical that you target the proper identifier to avoid unintended data loss.Unmount the target volume using the following command, replacing the identifier as appropriate:Īgain using the above example, which is not universally applicable:.Locate the USB volume name of the target drive (in this example, “THE_DESTINATION”) and make note of the identifier (in this example, “disk3s2”).This may look something like the following, it will be different on every Mac:ģ: Apple_Boot Recovery HD 650.1 MB disk0s3Ġ: Apple_HFS Macintosh HD *249.8 GB disk1 Type the following command to print a list of attached volumes on the Mac:.Attach the target USB drive to the Mac if you haven’t done so yet, then launch Terminal.You should back up the Mac with Time Machine before beginning. There is no confirmation, therefore it is critical you use the proper drive identifier and proper syntax to avoid erasing the wrong thing. This will erase the target volume, replacing whatever data is on the destination drive with the ISO contents.

How to Copy an ISO File to a Target Drive Using ‘dd’ in Mac OS X That risk makes this method not appropriate for novice Mac OS X users, instead, those users should turn to the simpler approach of using Disk Utility to burn an ISO the traditional way instead. By using sudo dd, there is little margin for error, and a wrongly implicated disk identifier could result in permanent data loss. It’s important to note this is somewhat advanced and should only be used by Mac users who are thoroughly comfortable with the command line. There are alternative solutions, but this command line approach using dd requires no third party downloads, it is quite fast, and is consistently reliable in producing bootable volumes out of ISO files. If you have downloaded an ISO image of another operating system, say Ubuntu Linux or Windows 10, and you wish to turn that ISO image file into a bootable USB installer drive using a USB flash drive or USB key, you’ll find the most reliable way to copy or ‘burn’ the ISO to that target USB volume is by turning to the command line of Mac OS X.

Burn iso to cd mac